Hello and welcome to my Rome Cleaver bindings review.
In this review I will take a look at the Cleaver as freeride snowboard bindings.
As per tradition here at SnowboardingProfiles.com I will give the Cleaver a score out of 100 (based on several factors) and see how they compare with other Freeride bindings.
NOTE: The review below hasn't been updated beyond the 2025 model as the 2025 was the final version of the Cleaver. There isn't a direct replacement for the Cleaver, but the closest equivalent Rome binding would be the Katana FW Pro, IMO.
Overall Rating
Bindings: Rome Cleaver
Price: $489 (USD recommended retail)
Style: Freeride
Other Uses: Aggressive All-Mountain
Flex: Stiff (8/10)
Rating Score: 92.1/100
Compared to other Men’s Freeride Bindings
- The average score was 86.1/100
- The highest score was 92.1/100
- The lowest score was 80.6/100
- The average price was $502
- The Cleaver ranked 2nd out of 11
Overview of the Cleaver’s Specs
Check out the tables for the Cleaver ’s specs and available sizes.
Specs
Style: | Freeride, aggressive all-mountain |
Price: | $489 - BUYING OPTIONS |
Ability Level: |  |
Flex: |  |
Weight: | Normal |
Mounts To: | 2 x 4 | 4 x 4 | Channel |
Sizing
SIZE | US BOOT SIZE | EURO BOOT SIZE | UK BOOT SIZE |
|---|---|---|---|
M/L | 7-10.5 | 39-44 | 6-9.5 |
L/XL | 10-13 | 43-47 | 9-12 |
Who are the Cleaver Most Suited To?
The Cleaver are best suited to those looking to charge and carve but at the same time want good board feel and shock absorption.
Matches best with boards in that 7/10 to 9/10 flex range.
Not for beginners and too stiff for most intermediate rider's too. These are for advanced to expert riders or particularly strong/athletic or heavier intermediate riders.
The Cleaver in More Detail
O.k. let’s take a more detailed look at what the Cleaver are capable of.
Demo Info
Binding: Rome Cleaver 2023, M/L
Date: March 18, 2022
Conditions
Foggy but visibility wasn't terrible, but not 100%. I'd say about 70%. Snowing to start with, but quite wet snow.
Temperature was ranging from -1°C (30°F) to 1°C (34°F) through the day. Ranging from -5°C (23°F) to -2°C (28°F) with wind chill.
24 hour snow: 19cm (7.5")
48 hour snow: 21cm (8")
7 day snow: 63cm (25")
On groomer: Soft packed to start and got a little slushy later in the day.
Off groomer: Soft with a fresh layer on top. Nothing super epic or anything but still fun to get off groomer and into the trees.
Set Up
Bindings angles: +15/-15
Stance width: 555mm (22″)
Board tested with: Lib Tech Terrain Wrecker
Boots tested with: Adidas Tactical ADV, size US9.5
Baseplate Length: 25.1cm (9.9”)*
*measured on the top side of the footbed - a little bit of angle down to underside of baseplate where it's 23cm (9.1")
Highback Height: 21.7cm (8.5")*
* from board to top of highback is 28cm (11")
Weight: 960g (2lb 2oz)*
* for one binding, including screws and disc. The average weight of around 60 bindings (2019, 2020, 2021, 2022 & 2023 models) I have weighed, was 913 grams. The lightest was 680 grams and the heaviest was 1,240grams. So the Cleaver was very slightly heavier than average, but essentially average - and felt normal on snow.
Flex
The highback felt similar, in terms of twisting and pulling back on the highback, to the Katana, which I also tested on the same day but slightly stiffer. And overall flex was a bit stiffer as well. Noticeably stiffer than my control bindings (Malavitas) but also not the stiffest I've ridden.
Responsiveness
The Cleaver's can really help to rail big carves and sustain them. Compared to the Katana and particularly the Malavita, you could get more from these bindings in terms of big, deep carves.
When it came to maneuverability at slow speeds, they made the board perform worse than the Katana and Malavita, which wasn't surprising, given their stiffness.
Board Feel/Butterability
For how stiff they were, they had surprisingly good board feel. Part of that is likely down to the smaller disc that they use.
Pop/Ollie Power
A little above average. Very similar to Katana.
Adjustability
Like the Katana, the Cleaver are super adjustable - you can adjust pretty much anything.
Heel Cup: Yes. This is great for boot centering.
Stance Width: The disc runs horizontal (and there's no need to have it able to run vertical with the heel cup adjustments doing the boot centering for you) - which gives you good stance width adjustability. It's not the most, because of the mini-disc, but the mini-disc is big enough that there is some micro adjustability.
Highback Lean: Yes and tool-less.
Ankle Strap Position: Yes. The Cleaver have a pivot mount on the ankle strap that gives you around 8 (yes 8!) different positions. So you can have it sitting high on the ankle for more ankle support/a more locked in feeling or you can have it sitting low on your ankle for a more free/surfy feel.
Toe Strap Position: Yes - 2 position options.
Ankle and toe strap length: Yes, like every binding. These adjustments are tool-less.
Gas pedal/toe ramp extension: You can't technically extend it. As in you can't make the footbed longer. But you can adjust the footbed backwards or forwards, which helps with getting your boots centered on the bindings and your footbed in the best position on the board (along with that heel cup adjustment).
Highback Rotation: Yes
Compatible with: 2 x 4 | 4 x 4 | Channel
You can also adjust the canting of the highback.
Shock Absorption
There is a really nice spongy feeling in the footbed, which is particularly soft and cushy in the heel and toe and firmer through the midfoot. There's padding on both the top of the footbed and on the underside of the base plate - allowing both good shock absorption and good board feel.
And on snow you can really feel that. They do a great job of dampening vibrations in chatter and absorbing impact on landings.
Entry/Exit
Nice smooth ratchets. Not the smoothest on the market but still really good. Generally easy and work well in terms of getting in and out of them.
Comfort
Nice and comfortable, particularly for stiffer bindings, which tend to be less comfortable, all else being equal.
Ankle Strap: Had a bit of a pressure point on top of right foot - as I had with Katana - initially, but having the strap slightly less tight helped that to go away, without loosing any response or ankle support. But yeah, I found that you could over crank it and get a pressure point there - at least with my feet. But overall the ankle strap is really nice and conformed well.
Toe Strap: No pressure points and felt really nice.
Canted Footbed: Yes
Padded Footbed: Really good padding (see shock absorption above).
Highback: Padding all over and felt nice and comfortable. No calf bite whatsoever, which is really impressive for a stiffer binding like this.
Ankle Support
In the position I had the ankle strap in, the ankle support was good - it was a really good balance of support with enough freedom. And the best thing is that if you felt like you wanted more support, you could easily achieve it with the pivot mount that gives you 8 different positions for where you want the ankle strap to sit. Same goes, if you wanted more freedom of movement for a more surfy vibe.
Score Breakdown and Final Verdict
Check out the breakdown of the score in the table below.
RATING | Contribution to Final Score | |
|---|---|---|
CARVING | 4.5 | 27/30 |
SLOW SPEED RESPONSE | 3.5 | 3.5/5 |
ADJUSTABILITY | 5.0 | 15/15 |
ANKLE SUPPORT | 4.5 | 13.5/15 |
SHOCK ABSORPTION | 4.5 | 9/10 |
COMFORT | 4.0 | 8/10 |
BOARD FEEL | 4.0 | 8/10 |
ENTRY/EXIT | 4.0 | 4/5 |
TOTAL after normalizing | 92.1/100 |
The Cleaver are first and foremost about charging and carving. But they also have surprisingly good board feel and are surprisingly comfortable.
They also have high-end shock absorption, so when you're in any not so smooth terrain, they do a great job of dampening chatter and absorbing shock on landings.
All round just a great pair of bindings for those looking to charge.
More Info, Current Prices and Where to Buy Online
If you’re interested in learning more about the Cleaver or want to research prices and availability check out the links below.
If you want to check out some other freeride bindings or want to see how the Cleaver compare to other freeride bindings, check out the next link.
Hi Nate, Update* I got the Rome Katana Pro’s as Rome sent a message about a limited restock yesterday. (I think only 3 pairs of M/L) so I jumped on it! I think they are going to match my style more for the superpig and being easier to tweak/ride pow on. As you know the straps can also be moved into multiple positions like the cleaver for more or less response. The upgraded carbon in the footbed and highback will be perfect for charging and still allow that katana feel for range of motion & freestyle. Thank you!
Do you feel that the KP binding can also be a good fit for my Greats? I have only ran the strata and like it a lot but think I would like more response for carving. Resale on Strata isn’t that great since they already are pretty cheap new. I might just keep them for the smaller indoor local park we have here in NJ.
Hi Nick, thanks for your messages and update.
Yeah, I would try the KP on the Greats to see how it feels. I think it could possibly work well. But yeah, if you have an indoor park, then the Strata might still work better in there, even if you like the KP with the Greats. And yeah, I wouldn’t say it’s as noticeable as a 2-step flex change moving to the lower strap position. I would say it’s 1 at most. You do get a bit more freedom of movement and you’ll certainly notice the difference when changing the strap position, but I find the flex feel is influenced more by the baseplate than anything else. It’s not everything and strap flex, strap position and high back flex certainly influence overall flex feel, but in my experience the baseplate has the most influence.
What’s up Nate? I have my 154 Yes Greats paired with Union Strata for all mountain freestyle/park. I recently added a 151 Superpig with Cleavers for a more freeride/carve/charge/pow setup. I read about changing the ankle strap to a lower position for a more surfy feel which I would do on a pow day for sure. My question is, would you give the cleavers a 9/10 for stiffness on a high ankle position, would you say 7/10 lowering the strap to a lower position, or is it not that noticeable?
I’m just trying to get a feel if I should try to get Katana Pro’s m/l (sold out everywhere) or keep and ride the Cleavers. I haven’t had the setup out there yet but I went cleaver because the superpig is wide, camber, stiffer and needs a responsive binding. I’m just worried about riding pow with the cleavers and struggling to get lateral play on the back foot. Other option could be to slap the Strata’s on it for a really surfy ride. Any insight would be appreciated!
-Nick
Curious if you would go with the cleavers or katana pos for a Rome Ravine Pro on PNW pow day.
Hi Matt
It would be a tough choice, but on a pow day, I’d probably go Katana Pros (assuming they are like stiffer Katanas, which is what they are supposed to be – but we haven’t tested them, so not sure how much stiffer they feel in reality) – just to get a bit more of a surfy feel. But I’d probably want the Cleavers on it on groomers, particularly for harder/more icy conditions. If you had both bindings, it would be a matter of whether you think you’d make the effort to change the bindings over for powder days (not that it takes that long or anything, but can be a psychological barrier). One thing you could do, if you just had the Cleaver is to adjust the ankle strap (it has the pivot mount, so you can make a lot of changes) to a lower position on the boot, to give it a more surfy feel.
Have you been able to use these or other Rome bindings for an extended period of time? I’m curious how the Pivot Mount bolts hold up after a lot of heavy usage. Seems like an extra moving part that would bear a lot of weight especially when on your toe edge and the heel strap is really pulling on those pivot mounts.
Hey Morgan, thanks for your message.
I haven’t had any Rome bindings for an extended period (nothing beyond a few weeks), so can’t say how they’d hold up over time unfortunately. The bindings I do test have had some miles under them when I get them though, but probably the like 15-25 days I’d say, once I’m finished with them. They were find at that point, but hard to say how they’d go for a more extended period of time.
Hey Nate,
I’ve read both of your reviews of the cleaver and katana. I’m looking to pair them with a lib tech orca.
Just curious which you would think would pair best with that board?
Cheers,
Rob
Hi Rob
Thanks for your message. I would go Katana on the Orca. Funny, I just rode the 2025 Orca today! The Cleaver would work, but a little stiffer than ideal for it, IMO. Katana would be a really good match, IMO.
Hope this helps.
Nate,
Awesome thanks for the reply.
Rob
You’re very welcome Rob. Happy riding!
Hi Nate, thank you for this review and the other amazing content.
I am deciding between Cleaver and Katanas and wondering if you may have an angle on this.
I am mostly snowboarding in Japan (Niigata and other areas around Nagano) and primarily enjoy powder and off-piste. Yet, I also like practicing butters, modest jumps and carving on the no-pow days. Looking for a versatile enough binding to accommodate this. Yet to buy a board, but will be experimenting with both powder boards and all-mountain freeride. Really enjoyed testing the Capita Spring Break UPDS a few weeks ago. I am 186 (6’2″), nearly 200 pounds, 11.5-12 boot size.
Hey Sunny
Thanks for your message. I would likely say go Katanas for what you’re describing, but if you ended up going with a stiffer board – like 7.5/10 or stiffer, then I would go Cleaver. But if you liked the SB UPDS, which isn’t that stiff, and you end up with a similarly flexing board – or anything up to a 7/10 flex (the UPDS felt like a 5/10 to me – I rode the 154 and I was 6’0″, 180lbs, size 10 boot at the time), then I would be leaning Katana.
Hope this helps with your decision
Would these be too stiff for a Rome Ravine? What binding in the Rome lineup would work best for the Ravine if I want it more all mountain setup?
Hi David
Thanks for your message. Apologies for the slow response, was travelling overseas and haven’t had the chance to get to your message until now.
I would say they are right on the edge. There is some chance that they’ll feel too stiff for the Ravine and make it feel a bit twitchy. I’d say they are borderline.
The best match for the Ravine, from Rome, IMO would be the Katana if you wanted Asym wrap or the DOD (we haven’t tested but on paper look to be a good match) or 390 Boss (also haven’t tested), if you wanted the Full Wrap. I would go either Katana or DOD (though couldn’t say for sure, having not tested them) probably.
Hope this helps and hasn’t come too late.
Hi Nate,
How would you rate the Cleavers vs the Union Falcors?
I have a set of Katana’s that i really like for riding around in Australia. I rode those on my yes typo and liked the asym wrap and thought for Australian conditions (which are mostly spring like ) where i dont really bomb and more cruise around were excellent.
However, I ride the Falcor’s on my YES Typo and YES Hybrid when riding in Japan. In good conditions i like to charge. I still really like the Faclors in terms of response but after days on end riding in Japan the comfort of the Faclors in terms of foot fatigue and calf bite was kind of turning me off.
I feel the Cleaver would give me the response of the Falcor, still have great board feel and ollie power but maybe some more dampening and less calf bite. I see the only downside as maybe being slightly heavier.
What do you think? Would love to know your thoughts.
Cheers.
James
Hi James
Thanks for your message.
I think the Cleaver could work for you. A little stiffer than Falcor but not by too much. Whether or not they would reduce the foot fatigue and calf bite it’s hard to say, because I haven’t experienced those with the Falcors – or with the Cleaver. Given your experience with the Katana, the Cleaver might suit you better. Note however, that stiffer flexing bindings can often lead to being more fatiguing over a long day, because they require more energy input from the rider. I did find the Cleaver really nice and damp though. I certainly didn’t get any calf bite from the Cleaver. But like I mentioned, it hasn’t been a problem for me with Falcors either (either when testing or with the 2019 model that I own). Do you have significantly different highback lean between the Katana and the Falcor? I find I’m most likely to get calf-bite when there’s quite a lot of forward lean, particularly if it’s a stiffer highback.
Hope this helps
Hey man, nice review. Just one note, the mini disc actually fits over 6 bolts (like a traditional disc). So I think it will fit on 4×4. The disc is a bit bigger than a mini disc but smaller then a normal disc. I really like it because I am quite heavy and like to butter and I don’t buy bindings with mini discs because on one of my boards, I notice the inserts were getting pulled up. Anyways just wanted to add it if you want to adjust your article. I really like your articles, I used your review of the K2 Thraxis before I bought them. Take care.
Hi Aren
Thanks for that.
Yeah, I do remember the mini disc was a bit bigger than a typical one and thought that it would work over 4 x 4.
But then I got a comment from someone who contacted Rome about fitting the Katana (which has the same disc) and were told it wouldn’t fit (see https://snowboardingprofiles.com/jones-mountain-twin-review – scroll down to load comments, then search for “Katana won’t fit the back inserts” and you should find it).
I was testing a lot of gear around the time I tested the Cleaver and when I checked my notes (I usually note down literally everything!), when writing up the review, I didn’t see anything specific about whether it could fit 4 x 4 or not, so to be safe I didn’t want to say that it could after getting that message about the Katana.
But if you have the Cleaver and it fits over 6 holes, then yeah, it should fit 4 x 4 fine, so I will adjust that now.
Thanks for the info.