snowboarding profiles logo mountain

Snowboarding Profiles

  • Gear Advice
    • Choosing a Snowboard
      • Snowboard Length Sizing
      • Snowboard Width Sizing
      • Based on How You Ride
      • Based on Skill Level
      • More
    • Choosing Bindings
      • Binding Sizing
      • Binding Flex
      • Binding and Snowboard Compatibility
      • Based on How You Ride
      • More
    • Choosing Boots
      • How To Choose Snowboard Boots
      • Boot Sizing
      • Boot Flex
      • Boot Lacing Systems
      • Boot Types
    • Choosing Outerwear
      • Choosing a Snowboard Jacket
      • Choosing Snowboard Pants
      • Choosing Goggles
    • For Beginners
      • Choosing a Beginner Snowboard
      • Choosing Beginner Bindings
      • Choosing Beginner Boots
    • Choosing by Style
      • All Mountain
        • All Mountain Snowboard
        • All Mountain Bindings
        • All Mountain Boots  
      • Freestyle
        • Freestyle Snowboard
        • Freestyle Bindings
        • Freestyle Boots
      • Freeride
        • Freeride Snowboard
        • Freeride Bindings
        • Freeride Boots
    • Set Up Advice
    • Other Gear Advice
  • Snowboard Reviews
    • Snowboard Top 10s
    • Snowboard Reviews
  • Binding Reviews
    • Bindings Top 10s
    • Binding Reviews
  • Boot Reviews
    • Boots Top 10s
    • Boot Reviews
  • Outerwear Reviews
    • Jackets Top 10s
    • Pants Top 10s

The Top 5 Beginner Snowboard Bindings for Men

Last Updated: November 19, 2020 by Nate 95 Comments

best beginner snowboard bindings

If you’re looking for your first pair of snowboard bindings and aren’t sure where to start then check out my list of the Top 5 Beginner Snowboard Bindings below.

This list is now updated for the 2020-21 season.

Each set of bindings will each receive a score out of 100 which reflects how well the bindings did when being specifically considered as beginner bindings.

Some Brief Stats for this List

Of the 26 different men’s bindings that I rated for suitability as beginner bindings:

  • The average score was 81.7/100
  • The highest score was 92.5/100 (see below)
  • The lowest score was 67.7/100
  • The average price was $222

A lot of the bindings are suitable not just for beginners but also for more advanced riders and for specific styles like freestyle – but for the purposes of this post, the bindings are only being assessed for their suitability for beginners.

Note: A beginners binding should definitely not just be considered a beginner binding just because it’s cheap – if it’s too low quality or if it's too stiff, that’s far from what a beginner should be using. Price is definitely a factor but it shouldn’t be the only factor.

OK let's get into the the top 5.

BEGINNER BINDING #5

Arbor Hemlock 2021

Bindings: Arbor Hemlock

  • US
  • CANADA
  • UK/EUROPE

Price: View More Info and Current Price Here

Price: View More Info and Current Price Here (CANADA)

Price: View More Info and Current Price Here (UK/EUROPE)

Smart rating score: 87.1/100

Flex: Medium-Soft (3/10)

To start the list off in #5, we have the Hemlock from Arbor.  

The Hemlock is nice and forgiving for beginners, but still has a quality feel to it - and still dons a decent price-tag. 

Learn more in the Video below

Score Breakdown for the Hemlock

RATING
(out of 5)

SCORE WEIGHTING

FLEX

5.0

25/25

PRICE

4.0

16/20

COMFORT

4.0

12/15

ADJUSTABILITY

4.0

8/10

ANKLE SUPPORT

3.0

6/10

ENTRY/EXIT

3.0

6/10

BOARD FEEL

4.0

4/5

SHOCK ABSORPTION

4.0

4/5

TOTAL after normalizing

87.1/100

BEGINNER BINDING #4

Union Contact Pro 2021

Bindings: Union Contact Pro

  • US
  • CANADA
  • UK/EUROPE

Price: View More Info and Current Price Here

Price: View More Info and Current Price Here (CANADA)

Price: View More Info and Current Price Here (UK/EUROPE)

Smart rating score: 87.6/100

Flex: Medium-Soft (4/10)

Next on the list, coming in at #4 we have Union's Contact Pro.

It's the most expensive on this list, but it's also the highest quality for riding beyond the beginner phase. Really good as a beginner binding, but can take you well beyond the beginner phase. 

Especially good as a freestyle binding. In fact it's #2 in the top 5 freestyle list. 

Check out the Video for more on the Contact Pro

Score Breakdown for the Contact Pro

RATING
(out of 5)

SCORE WEIGHTING

FLEX

4.5

22.5/25

PRICE

3.5

14/20

COMFORT

4.0

12/15

ADJUSTABILITY

4.0

8/10

ANKLE SUPPORT

3.5

7/10

ENTRY/EXIT

4.0

8/10

BOARD FEEL

5.0

5/5

SHOCK ABSORPTION

5.0

5/5

TOTAL after normalizing

87.6/100

BEGINNER BINDING #3

Burton Freestyle 2021

Bindings: Burton Freestyle

  • US
  • CANADA
  • UK/EUROPE

Price: View More Info and Current Price Here

Price: View More Info and Current Price Here (CANADA)

Price: View More Info and Current Price Here (UK/EUROPE)

Smart rating score: 88.7/100

Flex: Soft (2/10)

Coming in at #3 we have Burton's Freestyle bindings.

The price is right! - just $159 (USD)

But that's not the only reason these bindings made the list. The Freestyle's have a nice soft flex which helps with maneuverability at slow speeds, and is more forgiving of errors. 

Not only that they have awesome adjustability for lower end bindings, so you can get the fit and feel just right.

A great choice for those on a tighter budget.

Learn more in the Video below

Score Breakdown for the Freestyle

RATING
(out of 5)

SCORE WEIGHTING

FLEX

5.0

25/25

PRICE

5.0

20/20

COMFORT

3.0

9/15

ADJUSTABILITY

4.0

8/10

ANKLE SUPPORT

2.5

5/10

ENTRY/EXIT

3.5

7/10

BOARD FEEL

4.0

4/5

SHOCK ABSORPTION

4.5

4.5/5

TOTAL after normalizing

88.7/100

BEGINNER BINDING #2

Ride C-2 2021

Bindings: Ride C-2

  • US
  • CANADA

Price: View More Info and Current Price Here

Price: View More Info and Current Price Here (CANADA)

Smart rating score: 91.9/100

Flex: Soft (2/10)

In at #2, we have the Ride C-2 bindings.

Ride revamped their entire binding line-up for 2021 - and the C-2 is their softest flexing and lowest priced offering. 

But they also offer up easy rideability and decent enough quality.  

Score Breakdown for the C-2

RATING
(out of 5)

SCORE WEIGHTING

FLEX

5.0

25/25

PRICE

5.0

20/20

COMFORT

4.0

12/15

ADJUSTABILITY

3.5

7/10

ANKLE SUPPORT

3.0

6/10

ENTRY/EXIT

4.0

8/10

BOARD FEEL

3.5

3.5/5

SHOCK ABSORPTION

4.0

4/5

TOTAL after normalizing

91.9/100

BEGINNER BINDING #1

Union Flite Pro 2021

Bindings: Union Flite Pro

  • US
  • CANADA
  • UK/EUROPE

Price: View More Info and Current Price Here

Price: View More Info and Current Price Here (CANADA)

Price: View More Info and Current Price Here (UK/EUROPE)

Smart rating score: 92.5/100

Flex: Medium-Soft (3/10)

And taking out the #1 spot again this year, we have the Union Flite Pros.

Like the #3 & #2 bindings on this list, the Union Flite Pros, are super low cost. So this is another great choice for the beginner who can’t, or doesn’t want to, invest too much.

But you still get bindings that are quality – even Union’s entry level bindings are decent quality.

But most importantly they are ideally suited to beginners, with a nice easy flex. They are really forgiving, maneuverable at slow speeds and have a consistent smooth response.

These bindings are also super light (just 760 grams per binding - by my weighing, with disc and screws) – if you can find a lighter binding at this price-point, I’d like to know about it!

Check out the Video for more on the Flite Pros

Score Breakdown for the Flite Pro

RATING
(out of 5)

SCORE WEIGHTING

FLEX

5.0

25/25

PRICE

5.0

20/20

COMFORT

3.5

10.5/15

ADJUSTABILITY

4.0

8/10

ANKLE SUPPORT

3.0

6/10

ENTRY/EXIT

4.0

8/10

BOARD FEEL

4.0

4/5

SHOCK ABSORPTION

4.5

4.5/5

TOTAL after normalizing

92.5/100

Thanks for Reading

There you have it – that’s my top 5 men’s beginner snowboard bindings for 2020-21.

I hope this has helped you find the right bindings for you.

Check out the links above for each binding to learn more about that particular binding.

Even though all of these bindings are reasonably priced, if you’re looking to get an even better deal check out the 2020 model of each binding as you’ll be able to get them at a discounted price, if they’re not all sold out. For the latest model check out the links under each binding above. For past year’s models check out the links below to see if they have any 2020 models left.

  • US
  • CANADA
  • UK/Europe

>>Past Season's Bindings at evo.com

>>Past Season's Bindings at steepandcheap.com

>>Past Season's Bindings at the-house.com

>>Used Bindings at geartrade.com

>>Past & New Bindings at PRFO.com

>>Past Season Bindings at Blue Tomato UK


Share0
Tweet0
Pin0

Filed Under: 2017 Snowboard Binding Reviews, 2018 Snowboard Binding Reviews, 2019 Snowboard Binding Reviews, 2020 Snowboard Binding Reviews, 2021 Snowboard Binding Reviews, Binding top 10's, Men's Beginner Binding Reviews, Women's Beginner Snowboard Bindings Reviews, Women's Snowboard Binding Reviews Tagged With: best beginner snowboard bindings, best beginner snowboard bindings 2019-20, best beginner snowboard bindings 2020-21, best beginner snowboard bindings 2021, top bindings for beginners

About Nate

Nate is passionate about and loves learning new things everyday about snowboarding, particularly the technical aspects of snowboarding gear. That, and becoming a better rider and just enjoying and getting the most out of life.

Comments

  1. Dig says

    September 15, 2020 at 9:53 am

    Hi Nate! Man do I love your site, appreciate all your research.

    I am a beginner…with probably 8 days or so under my belt, but plan to start going every year. I’m about 5’9″ 155 lbs and looking to buy some bindings to match my new board.

    I am looking at picking up likely a K2 Standard, with the Arbor Foundation in the corner of my eyes as well.

    Do you have any recommendations for bindings to match those two? Same question with boots if you have any!

    Read through your reviews and wasn’t sure if there’s any specific to go along with those boards to consider! Thanks!

    Reply
    • Nate says

      September 15, 2020 at 1:23 pm

      Hi Dig

      Thanks for your message.

      For the K2 Standard or the Foundation, most from this list would be suitable. The one that I would cross off would be the Burton Freestyle, just because it’s probably a little soft, even for those boards. The rest on this list should be a good match. And all will be compatible. The only thing you’d need to think about in terms of compatibility for those 2 boards is just not to go Burton “EST” model, as they won’t be compatible, but Burton Re:Flex and all the other brands will be compatible.

      In terms of boots. Anything that’s 3/10 or 4/10 flex would be a good bet for that setup. A majority of those from the following list would be good bets, IMO:

      >> Top 7 Beginner Boots

      The only one I would probably cross off is the Burton Invader – again, just a bit on the soft side.

      Hope this helps

      Reply
  2. Matthew says

    July 29, 2020 at 2:24 am

    Hi, Nate,
    Greetings from Poland!
    I have been trying my hand at snowboarding for two seasons. So far I have only used the equipment from the rental shop, but for the next season I would like to finally buy something of my own. I’m still a beginner, so I’m thinking about buying a Salomon Sight board. I only have a problem with matching bindings. I was thinking about Union Flite Pro bindings. Could you tell me if this is a good choice in this case and if these particular bindings will match the board I have chosen?

    Thanks a lot!
    Matthew

    Reply
    • Nate says

      July 31, 2020 at 1:26 pm

      Hi Matthew

      Thanks for your message.

      The Sight is a great beginner option, so I think this would be a really good choice. The Flite Pro also great as beginner bindings and also a good match the Salomon Sight, IMO. So, I think you’re good to go with that as a really good beginner setup.

      Hope this helps

      Reply
  3. Adem demir says

    April 4, 2020 at 10:44 am

    Hello nate how are u?? I bought burton freestyle bindings for my capita oterspace living but did i do wrong??? Should I buy custom???I ride on offpist and pist not snowpark if u say buy custom i will change if i can.

    Reply
    • Nate says

      April 4, 2020 at 1:02 pm

      Hi Adem

      I’m good thanks. Hope you are too.

      For the OSL, I would say the Custom would go better than the Freestyle. The Freestyle is a little too soft for the OSL, IMO. The Custom is even probably a little soft for it too, ideally, but it would be a better match than the Freestyle, IMO.

      Ideally, from Burton, the Genesis or Malavita would be the best pair with the OSL, but I know those are a lot more costly. The Mission is a less costly alternative that I think would work well with the OSL.

      So, I would go Custom or Mission, depending on budget, but either would be an improvement from going with the Freestyle for the OSL.

      Hope this helps

      Reply
  4. Rohan says

    February 19, 2020 at 3:51 pm

    Hi Nate,

    Firstly, Thanks for all the great content & the advice you have offering!

    I’m looking for some advice.

    My riding experience: I’m a beginner rider who started this season (2020) and loved the sport enough that I would like a full setup of my own rather than renting. I’ve been on the slopes about 8-10 times this season and my riding has significantly progressed. Have no problems linking turns and have I’m carving on green slopes. I’m 5’7, 150 lbs, US boot size: 8.5.

    I stumbled upon some great deals at a local store and I have already purchased the following. I would really appreciate your expert opinion on the same based on which I might return a few things:

    -Snowboard: I bought a Burton Process Flying V board 2020. I’m not really sure what kind of riding I’ll be into but I would definitely like to hit the parks once I get better. For now, I want a board that’ll last long, suit well for my level of riding and will help me progress better. Do you think the flying V is the right choice? Any other board or profile that you would recommend? Also, I brought size 155; do you recommend a shorter board (152)?

    -Bindings: I bought a Burton Cartel ReFlex 2020 (The deal on these Cartels were too good to let go). Reading through your reviews, it looks like it might be a bit on the intermediate side due to its flex rating. I wanted to take your opinion before I go ahead and return them. Any other bindings would you recommend for the above board?

    -Boots: I bought a Burton Ruler BOA. Would you recommend a different Boot for a beginner rider?

    Really appreciate your help.

    -Rohan

    Reply
    • Nate says

      February 21, 2020 at 2:24 pm

      Hi Rohan

      Thanks for your message.

      I wouldn’t say it’s an ideal beginner setup, but at the same time it’s doable, particularly since you’ve already got that 8-10 days under your belt. The Process Flying V is a good flex and profile for a beginner in terms of ease of turning and controlling. The only thing to consider is that it’s quite a loose feeling board, which some beginners don’t like (particularly for getting off the lift). But otherwise a very good beginner option that should stay with you for a good while through your progression. Size-wise, however, I think the 152 would probably have been the better option for your specs/ability.

      The Cartel’s are probably the least beginner friendly element in your set up, just because they’re stiffer than ideal for a beginner. Stiffer gear (whether board, bindings or boots) can make it more difficult to maneuver, particularly at slower speeds, which is how beginners are typically riding. They’re not oppressively stiff – 6/10 by my feel, but they’re just stiffer than ideal for a beginner.

      The boots are probably going to be fine. Again probably stiffer than ideal for a beginner, but not far off – and if you find that they fit well, I would stick with those.

      So… board you should be good, so long as you’re not too worried about it being on the looser side and are OK with the size – ideally I’d say 152 though, and the boots should be all good. The bindings, I think you’ll get away with but if you’re worried, then you could look at the following:

      >>Top 5 Beginner Bindings

      >>Top 5 All Freestyle Bindings

      Ideally something around 4/10 as a beginner and to match the Process Flying V and Ruler (assuming you stick with those) and up to 5/10. I would try not to go too much softer than 4/10. You could, as a beginner, but softer wouldn’t match what you have in your board and bindings.

      Hope this helps

      Reply
  5. Ravi Singh says

    August 15, 2019 at 3:39 pm

    Nate,

    you clearly know what you’re talking about, im a big fan of yours.

    a question,i’m a beginner and I have the Burton freestyles, I keep hearing about the Union Flite Pros, may I ask what is the primary difference between the 2 above models?

    I mean as a beginner will i feel a difference,if it makes a diff i ride a horrorscope 2020

    Cheers

    Reply
    • Nate says

      August 16, 2019 at 10:47 am

      Hi Ravi

      Thanks for your message.

      The Flite Pros, IMO, are slightly better quality and lighter. I think you’d notice a bit of a difference but not a massive difference. Not enough to change, IMO. I would hold on to the Freestyle’s until you’ve progressed further and change once you’re ready to upgrade to something a little more advanced.

      Hope this helps

      Reply
  6. Elvis Almenar says

    March 17, 2019 at 12:23 pm

    Hi Nate,

    I think I scr*#ed up, I read your article and decided to buy the Union Flite Pro, however my board is a second hand 2008 Burton Clash that has 3D pattern and I’m not sure if the discs that come with the FLites are compatible. Do you think the discs brought by the FLites will work? or I have to buy an additional disk for 3 holes like this

    PD: Your page is amazing!

    Union Binding Co Parts 3 Hole Disc

    Reply
    • Nate says

      March 18, 2019 at 11:01 am

      Hi Elvis

      Thanks for your message.

      As far as I know (and I don’t deal with the 3D pattern at all, so I’m not familiar with it), you’ll need to get a separate disc (the one that you’ve linked to there) to mount to a board with e 3D insert pattern. You could try with the disc that comes with the Flite Pros, but I don’t think it will quite work because of the dimensions of the 3D pattern, or at least not work optimally. As far as I know Union discs used to work with the 3D pattern but since the 3D pattern has become increasingly rare most binding companies aren’t accommodating for it anymore.

      Reply
      • Elvis Almenar says

        March 18, 2019 at 8:08 pm

        thank you for your prompt response Nate, I was investigating and on the Union Bindings page they indicate that the discs compatible with the 3D pattern are the Youth discs that come in the bindings Cadets for children, however, seeing the images I realize that the only difference is the size of the diameter of the disc since I imagine that the 4×4 and 4×2 holes maintain their standard even in the snowboards for childrens. If so, I think it could work. Sorry if that I can’t only wait for them to arrive and test, but I want to resolve before the snow season arrives since I live in Chile and things take a little while to arrive

        https://imgur.com/F2ZPylE

        Reply
        • Nate says

          March 19, 2019 at 1:40 pm

          Hi Elvis

          Again, I’m not sure if the dimensions are going to work with 3D pattern since I have no experience with this, except with my sons small Burton board. In that case we tried to put K2 bindings on it but they didn’t work (which did work for 4 x 4 and 4 x 2). So I couldn’t be sure. But I have emailed Union to ask them. Hopefully they will respond soon and I will let you know what they say.

          UPDATE: Union Just responded – this is what they said word for word “You’ll need to get a separate disk to make it work. You’ll need the 3-hole disk” – so it looks like you’ll need to get the 3-hold disc. They gave me the following link – Union 3 Hole Disc at Switch Skate and Snow – not sure if you can ship to Chile or not, but check it out to see if you can.

          Reply
          • Elvis Almenar says

            March 20, 2019 at 7:20 am

            Thank you very much Nate for taking the time to find out and help me. I bought the disc that you indicate me and I sent it to an international currier, it will take a little while but it will arrive before the start of the season.

            Thank you very much again

          • Nate says

            March 20, 2019 at 2:27 pm

            You’re very welcome Elvis. Hope you have an awesome upcoming season!

  7. Christopher Anderson says

    March 8, 2019 at 6:40 pm

    Hi Nate,

    First, thank you for all the great information, I’ve learned a lot from reading your posts. I’m an advanced skier turned into a beginner snowboarder, looking to purchase my first setup.. My snowboarding style is mostly cruising the groomers with some glades.

    Considerations: Grip for the icy east coast, stiffer flex ratings due to my weight, boots good for wider feet. Cost, best bang for you buck. Currently renting on a random Burton 158W

    Stats: 6′, 235lbs, mondo size 30.0, foot size 12

    So far Ive found the salomon sight x and burton instigator..

    Lost on bindings, lost on boots…HELP!! Thanks Nate!

    Reply
    • Nate says

      March 12, 2019 at 10:54 am

      Hi Christopher

      Thanks for your message and apologies for the late reply – I’ve been testing a lot of gear the last few days, and just catching up with replies now.

      Length-wise, I would be looking at something in the range 160-162, as a beginner. When you’re more advanced you could even go longer than that. Going a little stiffer than what I would normally recommend for a beginner board isn’t a bad idea, if you’re going to be above weight recommendations – as the board will likely feel softer to you in that case. Keeping in mind other things that make a board good for a beginner, you could also check out the following:

      >>Top 10 Intermediate Snowboards

      Width-wise, certainly wide with 12s.

      If you wanted to go with the Sight or Instigator, then I would say go 162W for the Sight and 160W for the Instigator. But note that these are quite soft boards. Which is good when you’re starting out, but it’s just whether or not they will feel too soft for you. The other thing is that the Instigator might not be the best option for the hard/icy conditions it sounds like you encounter a lot.

      Some other options (more medium flex, good in hard/icy but still beginner/intermediate appropriate), would be the:

      – Rossignol Templar: 162W (5/10 flex)
      – YES Basic: 163W – more medium-soft, but still a little stiffer than the Sight and Instigator (4/10 flex)
      – YES Typo: 163W – a little stiffer flexing than the Basic – and a little more all-mountain oriented (4.5/10 flex)
      – YES Libre: 161W (4.5/10 flex)

      There are other options too, but those are the first ones that come to mind.

      In terms of boots, check out the following for more on boot fitting and boots for wider feet:

      Sizing Snowboard Boots: The Different Brands

      Wide Snowboard Boots for Wide Feet (check out the comments section on this one. I don’t have wide feet personally but there are a lot of comments in there from people who do)

      And for some good options:

      >> Top 7 Beginner Boots

      >>My Top Freestyle (medium flex) Snowboard Boots

      For bindings, check out:

      >>Snowboard Binding Sizing

      >>Top 5 Beginner Bindings

      >>Top 5 All Freestyle Bindings

      >>Top 5 All Mountain Bindings

      I try to match flex between boards, boots and bindings. But doesn’t have to be exact. But I wouldn’t go with super soft boots and bindings on a medium flex board, or super-stiff. So trying to get a relatively close match is a good idea, IMO.

      Hope this helps

      Reply
  8. Andrew Holliday says

    January 9, 2019 at 4:21 am

    Hey Nate,

    I’ve read a bunch of these posts and had a couple questions I’d love to run by you. I live in Memphis TN and only get to hit the slopes a couple times a year. Finally got sick of renting every trip, and got a 2018 Flow Merc and some Solomon Dialogue boots. Now I’m just looking for the right pair of bindings to complete my setup. I’m 5’9″, 175lbs and would classify myself as a solid intermediate. I don’t mess with the parks (at least not yet), but cruise down groomed runs no problem, turns aren’t an issue. From what I’ve read, I think I should be looking for a binding within the 5-6 flex range but I’d appreciate any advice you could give me. I currently have a million google tabs open searching for Burton mission/custom/cartel, Union flite pro/ST, Rome 390 Boss, and K2 Lien FS/AT… so my head is spinning at the moment. Would love to stay under $200 if that could score me some quality bindings. (Only 24 and just graduated, but hoping to move out West someday). Heading to Salt Lake at the end of the month, so I hope to hear back from ya!

    Thanks my guy!

    P.S. – Would also love to hear your thoughts about the 156cm Flow Merc for my size, hopefully I bought a decent board. I was trying to stay under $300 and this review kind of talked me into it: https://www.youtube.com/watch?v=jb2nUcBuu-g

    Reply
    • Nate says

      January 11, 2019 at 11:01 am

      Hi Andrew

      Thanks for your message.

      The Flow Merc in the 156 is a suitable board and size for you, IMO, based on what you’re describing. I’d say it’s a beginner/intermediate level board, based on specs (not a board that I’ve ridden). Bindings-wise, anything 4-5/10 in terms of flex would be a good idea. Even 3/10 would work for that board (assuming the flex rating of 3/10 is accurate for it). But if you want bindings that will last a little longer in terms of progression, then 4 or 5/10 would be fine too.

      So you could certainly go with something like the Flite Pro, if you wanted a good price for still a good quality binding. Or the Union STR if you wanted something a little stiffer flexing, but still a great price.

      K2 Lien FS (which is replaced by the Lineup for 2019) would also work well. If you can find the FS, in a past model, you should be able to find it for under $200.

      The Flux DSL or DS would also be a good option or something like the Union Contact Pro – again, if you can find something in a past model, you might be able to find them for under $200.

      Hope this gives you some options

      Reply
  9. Kev O'Rourke says

    December 16, 2018 at 1:36 am

    Hi nate,

    Looking for a bit of guidance please. Complete beginner just starting to link turns and want to get away from the hire equipment so I can move on.

    I’m 5ft 9 and 200lb with a size 10UK boot. Just about to purchase a full setup.

    K2 standard is looking favourable at the moment as its on sale. Could you advise on length and width and a suitable binding please? (I was thinking 155 wide). I’ll be going for the Moto reduced footprint boot if that helps the waist width situation.

    Thanks

    Kev

    Reply
    • Nate says

      December 17, 2018 at 12:38 pm

      Hi Kev

      Thanks for your message.

      I think the 156W would be your best bet for this board (if looking at 2019 model). Or 155W if looking at an older model, which I’m guessing you are, if you’re getting a good deal. You could probably get on the 158 for width, with Motos at a squeeze if you were to stick to something like +15/-15 angles. But I think the 155W/156W is a better length/width combination for you.

      Hope this helps with your decision

      Reply
      • Kev O'Rourke says

        December 17, 2018 at 2:19 pm

        Excellent. Thanks for the quick response Nate.

        Any thoughts on a good binding match for the 155w?

        Thanks again

        Kev

        Reply
        • Nate says

          December 17, 2018 at 2:37 pm

          Hi Kev

          Check out the following for some good beginner binding options:

          >>Top 5 Beginner Bindings

          But if there’s nothing there that you can find available and want more options let me know.

          And for sizings depending on brand:

          >>Snowboard Binding Sizing

          Reply
          • Kev O'Rourke says

            December 18, 2018 at 12:46 pm

            Awesome. Thanks

          • Nate says

            December 19, 2018 at 2:07 pm

            You’re very welcome Kev. Hope you have an awesome season!

  10. Kev O'Rourke says

    December 15, 2018 at 4:59 pm

    Hey Nate,
    Looking for a steer on a newbie set up. After reading your review I’m looking at a K2 standard as I can pick up a 2018 heavily reduced.

    I’m 5ft 9 around 200lb with size 10UK boots but will be going for a reduced footprint boot like the Moto but unsure about needing to go wide.

    Could you advise a board length, width and a suitable binding for the K2 standard please.

    Thanks in advance

    Kev

    Reply
  11. Tahne says

    December 11, 2018 at 10:33 pm

    Hey nate i am new to boarding but will be spending almost every day for a couple hours learning next two seasons, and want a binding i wont grow out of so to say, maybe feeling its tooo flexible. I was shooting for an all mountain binding but leening more towards freeride stuff, not heaps of park. And one thats pretty durable if possible.

    I have found some good deals on bindings that seem to be well reviewed but im struggling to make to the final decision and was hoping you could help.

    P.s my price max is like $200 so hunting for clearances etc.
    My boards are a
    Smokin team ctx 156w and
    Rome sds agent rocker 155

    K2 lien AT 2015/17 $160
    Burton mission 2018 $180
    Flux DS 2018 $175
    Ride revolt 2018 $155
    Salomon district 2018 $150
    salomon alibi 2018 $150

    Reply
    • Nate says

      December 12, 2018 at 2:26 pm

      Hi Tahne

      Thanks for your message.

      I would cross off the Alibi at this stage, as I feel that it would be too stiff (7/10 by my feel) for you for now. Even though you’re looking to make sure you don’t have something too soft, because you want it to last, I think the Alibi would be a step too far, and could hinder your progress/technique.

      Same goes, but to a lesser extent to the Lien At (6/10 flex) and Burton Mission (6/10).

      The Revolt (5/10 flex), DS (5/10) and District (4.5/10) would be what I would be weighing up between. They offer enough flex that you won’t grow out of them too quickly but not so stiff that they would effect your progression too much.

      I own the 2016 DS and I’ve hammered them and they were ex demo bindings and they’re still going strong, so for me they have been very durable. I can’t attest either way to the Durability of the Revolt or the District, which I’ve only ridden for short stints.

      Hope this helps with your decision

      Reply
  12. Bruce says

    November 17, 2018 at 12:02 pm

    Hey Nate,

    Can you give me your recommendation for bindings to suit the Yes, Typo for a beginner?

    I’m 6’1 and 200lbs, around a 9.5 boot. Based on what I’ve read, it looks like the Union Contact Pro might be a good fit.

    Would you mind letting me know if I’m on the right track and if there’s anything else I should consider?

    Thanks again for all your support!

    Reply
    • Nate says

      November 17, 2018 at 2:38 pm

      Hi Bruce

      Yeah the Contact Pro would definitely work for the Typo and as a beginner, IMO. As would something like the K2 Lineup and Flux DSL. Anything with a 4/10 flex or up to a 5/10 flex would be a good option for the Typo and for a beginner. Preferably more like 4/10 for a beginner.

      Hope this helps

      Reply
      • Bruce says

        November 17, 2018 at 3:35 pm

        Thanks again Nate,

        I’ll check out the K2 and Flux, too.

        I’ll post a question about the boots on the beginner boots list so it’s there for anyone searching in the future.

        Reply
        • Nate says

          November 19, 2018 at 11:18 am

          Thanks Bruce!

          Reply
  13. JASON says

    November 14, 2018 at 12:21 am

    Hello, I’m 5’10, 250 pounds, boot size 12 burton moto and have Arbor Formula 162MW. I’m looking at beginner bindings to match my board however, it’s difficult to know what exactly I’m looking for as a beginner with less than 30 days of snowboarding. I’ve been told Arbor Hemlocks, Burton Customs etc… Respectfully requesting assistance to match bindings with board described above, thank you in-advance!

    Reply
    • Nate says

      November 14, 2018 at 2:21 pm

      Hi Jason

      Thanks for your message.

      With that setup, I would go Arbor Hemlock, K2 Lineup, Flux DSL. Those would be a good flex match for the Formula. You could certainly go with Burton Customs too. But they might be bordering on a little too soft. But not far off.

      In terms of the Hemlock. My experience with them is that the ratchets aren’t the best – quite sticky to get on and off. But once you’ve got them on, that’s not an issue, but just wanted to warn you in case that’s an important consideration for you.

      Hope this helps with your decision.

      Reply
  14. Philip Hague says

    June 19, 2018 at 5:25 pm

    Hi Nate,

    I’m a beginner snowboarding way down here in New Zealand (winter snow season is just about to start in a couple of weeks).
    I am still learning how to turn and would probably be looking for an All-Mountain type board.
    Not ready for tricks or park riding or freestyle just yet 😛
    NZ fields are typically a mix of icy/kind of hard packed groomed runs with powder around ankle to mid-calf height on a good day.

    I have a couple of questions and looking for your professional help/opinion.

    1. What snowboard/s (e.g. brand, model, length, flex, rocker type, etc.) would you recommend for me as a beginner? (I have looked at plenty of “top 5″ recommendations but I am still lost).
    I am about 5,8″-5,9” height and weigh about 150 lbs.
    I have Burton boots US size 10

    2. What snowboard bindings would you recommend for me as a beginner?
    (I’m thinking a soft – med flex but so many choices can be confusing)

    I’m looking at getting board and bindings from the US as the sales can be worth the exchange rate and shipping sometimes.

    Any help would be much appreciated.

    Phil

    Reply
    • Nate says

      June 20, 2018 at 1:13 pm

      Hey Phil

      Thanks for your message.

      Firstly in terms of size, for your specs and as a beginner I would say:

      Length: I would for something between 150 and 152cm, maybe 153cm at a push.

      Width: Depends on binding angles, but something 251mm to 257mm in terms of waist width would be a good range to look at to cover most binding angles. If you know what you like already, then if you ride with something like +15/-15 then you could narrrower if you wanted, down to around 247mm at the waist. But if you have a very straight back foot (e.g. 0-3 degrees), then try to go at least 252mm at the waist.

      Given that you’re a beginner, and often ride in hard/icy conditions I would say:

      Brand: YES, GNU, Lib Tech, Niche, Rossignol, Jones, Never Summer, Salomon, Arbor (based on icy conditions)

      Flex: Medium-Soft – best as a beginner. You don’t have to go super soft, but I’d recommend going a little softer than medium. Number-wise 3/10 or 4/10 works well. You could go softer, but going with something like that allows for progression into a more intermediate level without changing boards.

      Camber Profile: Something Hybrid. Rocker/Camber/Rocker OR Camber/Rocker/Camber OR Rocker/Flat/Rocker. Just make sure there isn’t too much camber going on (as that can make a board feel more aggressive and makes it more likely that you’ll catch your edge).

      Model: The following models from the brands that I mentioned above are best for beginners, IMO. I’ve listed the style they’re best suited to, since you mentioned you were looking for something all-mountain.

      >>YES Basic – All-Mountain-Freestyle
      >>YES Libre – All Mountain
      >>YES Typo – All Mountain
      >>GNU Hyak – All-Mountain-Freestyle
      >>GNU Carbon Credit – Park/Freestyle
      >>GNU Money – Park/Freestyle
      >>Lib Tech Skate Banana – Park/Freestyle
      >>Lib Tech Box Scratcher – Park/Jib
      >>Niche Knew – Park/Freestyle
      >>Rossignol District – All Mountain
      >>Rossignol Circuit – Freestyle/Park
      >>Rossignol Templar – All Mountain
      >>Rossignol Trickstick – Park/Freestyle
      >>Rossignol Sawblade (New this year) – Park/Jib
      >>Never Summer Snowtrooper – All Mountain
      >>Salomon Sight – All Mountain
      >>Salomon Pulse – All Mountain
      >>Arbor Foundation – All-Mountain-Freestyle
      >>Arbor Formula Rocker – All-Mountain-Freestyle

      Hopefully that gives you enough options for boards there.

      For Bindings, yeah medium-soft again is a good way to go, IMO. Any binding on this list will do the job well.

      But to give you a few more options, you could also look at:

      >>Union Contact Pro – pricier than the Flite Pro, but the flex is right, and otherwise a good quality pair of bindings
      >>Flux DSL (new for this year – it’s a softer flexing version of their popular DS model)
      >>K2 Hurrithane
      >>Ride Rodeo
      >>Salomon District

      Hope this helps and gives you plenty of options to look for.

      Reply
  15. Roger says

    May 29, 2018 at 1:07 am

    Hi Nate,

    I’m a beginner whom started snowboarding 2 years ago and finally decided to buy my own gear. I am starting able to manage turns in beginner slopes, just want to ride smoothly with my friends without catching too much.

    I am a 6” tall, 175 lbs, size 10 boots. I studied your suggestion on beginner board and finally got a Salomon Sight. As the shop offered me good deal on the 158W, so I took it as I can’t see the big difference.

    However, I didn’t study your suggestion on Binding, and the shop suggested me the Salomon Rythem and I took it. My boots is from Burton. Does the above combination fits me? Thanks for your comments.

    Reply
    • Nate says

      May 29, 2018 at 10:29 am

      Hi Roger

      Thanks for your message.

      Usually I wouldn’t go for a wide board for size 10 boots. However, the 158W Salomon Sight isn’t actually that wide, so I think you will get away with that fine. Ideally a little narrower, but it’s pretty close in terms of width. The length is pretty good too. I would have probably suggested the 156 for you as a beginner, but the 158 is suitable as well. So overall, I think that size will work for you. Maybe not ideal, but definitely doable.

      The Rhythm bindings should match that board well – they’re quite soft flexing, like the Salomon Sight is.

      In terms of boots, I’m not sure which model of Burton you have, so I couldn’t say if they are suitable or not, but certainly no problem having Burton boots with this setup.

      Hope this helps and answers your questions.

      Reply
  16. Ian says

    February 22, 2018 at 10:47 am

    Hi Nate, your reviews are really useful.

    I am a beginner and just started to take lessons a few weeks ago. Now I am thinking about buying a board and bindings. I am 5’11, 160lbs and wear a pair of size 10 Salomon Faction boots.

    I am considering the Never Summer Snowtrooper 156 and the Yes Basic 155, which one would be more suitable for a beginner?

    And which bindings will make a better combination with the boards, the Burton Mission, Now IPO, Union Contact, or Salomon District?

    Do you have any other recommendations on the boards or bindings?

    Thanks a lot!

    Reply
    • Nate says

      February 23, 2018 at 9:22 am

      Hi Ian

      In terms of the boards, refer to my other comment on the other post.

      For those bindings, I would say they would all be suitable for that setup – except maybe the Burton Missions – I would go Burton Customs over missions for this setup, if you were to go Burton

      Reply
  17. Krasimir says

    February 12, 2018 at 7:43 am

    Hey Nate,

    Thanks for a great article! I’m a beginner-intermediate rider, been going to the mountain for 2-3 seasons for about 10-15 days a season. I can link turns and ride on reds comfortably, and prefer a smoother ride – nothing too fast. I love jumping those side hits and smaller park jumps. I’d consider myself an all-mountain/freestyle rider, with a little more emphasis on the freestyle part.

    I just got a new GNU Carbon Credit Asym 153 this year and am looking for a nice new pair of bindings to go with it. I my budget isn’t too big, but I want something from the mid-tier class that can last me a few years at least. From your list the Burton Customs caught my eye. I’m torn between those and Rome 390 BOSS G3’s which you don’t mention here. Can you give me some feedback and maybe how those would compare for my style of riding? I’m 5’10 and 165 lbs with size 9 feet.

    Thanks in advance!

    Reply
    • Nate says

      February 13, 2018 at 12:59 pm

      Hi Krasimir

      Thanks for your message.

      Yeah the Customs are a good option if you’re looking for a low cost option for all-mountain-freestyle riding and for your level. The 390 Boss’s aren’t something I’ve had the chance to test so I couldn’t say for sure, but based on the specs, I would say they are stiffer and a little more responsive (at higher speeds) than the Custom’s but based on other reviews don’t look to have as good a board feel. I personally find it’s nice to get good board feel, particularly for freestyle riding.

      If you were looking to be bombing hard and wanting a bit more response, then the 390 Boss might be better suited but based on what you’re describing, I think the Customs would be the better bet. You’ll get a bit more maneuverability at slower speeds out of them too – just being softer flexing.

      You could also check out the following, if you wanted to check out more options, but I think the Custom’s would work well:

      >>Top 5 All Freestyle Bindings

      And yeah, if you were to go Custom’s, then size Medium would be best for size 9s.

      Hope this helps

      Reply
  18. Dave says

    February 9, 2018 at 9:59 pm

    Nate,

    Great info. I have about 10 days on a mountain and have finally decided to buy some gear… looking at the Union Contact Pro as a binding that could last a while. Also, my fiancé is wanting gear. I was going to get her the burton stiletos and the union Milan’s to test out. She has the same experience as I do, but she prefers slower rides and has advanced a little slower. I am 6’0” and 200lbs, she is 5’10” and 127lbs.

    Any thoughts? What about board recommendations?

    Reply
    • Nate says

      February 10, 2018 at 8:34 am

      Hi Dave

      Thanks for your message.

      I think the Contact Pros would be a good choice – they’re quality bindings that could last you a long time, but they’re also beginner/intermediate friendly enough that they won’t stunt your progression. A good choice, IMO.

      If you’re looking at the same idea for boards (i.e. something that’s going to be fine for a beginner/intermediate rider but also something that can last you) then something like the YES Typo, Never Summer Snowtrooper or Burton Process Flying V would be great choices, IMO. Or you could go with something like the Capita Outerspace Living – just note that it’s slightly stiffer flexing than these other options, but if you’ve advanced quickly it might be fine for you – that and the Rossignol Templar. If you tend to ride in icy conditions a lot, then the YES Typo and Rossignol Templar are your best bets – otherwise anything there (assuming they have an appropriate size for you) would work well, IMO.

      You can see some more details on those here:

      >>My Top 15 Men’s Snowboards for Beginners

      In terms of length for you, I would say something around 158 to 160 for you. I would say around 162 at an advanced level, but it’s a good idea to take off some length before you get there. Since you have some experience and it sounds like you’re progressing well, then the higher end of that range is probably a good way to go – then you’d have a size that would still work as an advanced rider as well.

      If you could let me know your boot size (or your shoe size if you’re not sure of boot size yet) and then we can also take a look at an appropriate width range.

      I think the Stiletto would work well for your fiancé and the Milan probably too – the Rosa would be the easier Union options to learn on, the Milan a bit more of a step up, but if you’re able to get them for her to test out, then she can see which she prefers between the Stiletto and Milan. If you haven’t already you can also check out the following:

      >>Top Women’s Beginner Bindings

      In terms of boards for your fiancé, something from the following is a good place to start:

      >>My Top 10 Women’s Beginner Snowboards

      In terms of size – something around 145 to 147 would be a good length to look at (more like 150 at an advanced level, but that would be the best range to look at as a beginner. If you could also let me know her boot/shoe size as well, and I can recommend a width range if you’d like as well.

      Hope this helps

      Reply
  19. Andrew says

    January 9, 2018 at 8:37 pm

    Hey Nate. I’m taking lessons. I have my own gear. I was not fitted for anything at first, I just got some gear at a GREAT price. It’s a ride board and bindings. Salomon boots that were to big so I replaced them. I was really frustrated with my bindings so I just upgraded them. I was deciding between Burton Clutch or Salomon District. I went with the district. I will eventually upgrade my board so I’ll keep am eye on your lists.

    Thank you for putting these lists together. They really help!

    Reply
    • Nate says

      January 10, 2018 at 7:22 pm

      Hi Andrew

      Thanks for your message and you’re very welcome!

      Reply
  20. Freddy says

    December 18, 2017 at 7:57 pm

    I forgot to add that I’m 5’qq, 205 lbs, and size 10.5 boots.

    Reply
    • Nate says

      December 19, 2017 at 9:38 am

      Hi Freddy

      Thanks for the message.

      I’m assuming that was supposed to be 5’11” (with the q being closest to the 1). I think the 159W works for you.

      In terms of bindings, yeah the Missions are certainly a little stiffer than the Customs – and the 2018 models are stiffer than in past years too. If you’re looking at 2017 or prior models, then I think they will be fine. Burton do tend to have good cushioning in their bindings, so for you that sounds like it’s important. The Customs will do the job – but the Mission’s will certainly be more responsive, even if not quite as forgiving. If you want the ultimate in comfort, then something like the Genesis or Malavita would be the way to go – but they are also more expensive of course. The Cartel, I think, is a little more comfortable/slightly nicer than the Mission. It’s more expensive than the Missions, but still cheaper than the Genesis and Malavita.

      The Custom’s will be the most forgiving, in terms of being the softest flexing – but the others are probably still more comfortable overall, certainly the Cartels, Genesis and Malavita. And they’ll be more responsive too. The Custom’s obviously have the advantage of being the cheapest.

      Hope this gives you more to go off for your decision.

      Reply
      • Freddy says

        December 19, 2017 at 9:31 pm

        I know the Cartels etc would be better, but even Missions at my top price point. I would get 2017s. That’s why I wondered about K2 Formula–get decent reviews and supposed to be cushy. Yes, 5’11. Sorry. I just can’t figure out whether softer or stiffer flex is easier on knees. Stiffer means less movement and less chance to twist while initiating a turn, but softer might has more give which might mean less torque on knee. Anyway, I appreciate your advice.

        Reply
        • Nate says

          December 20, 2017 at 1:54 pm

          Hi Freddy

          Yeah, I thought those others might be out of your price range. You make a good point that something too soft might not be that knee friendly either – but I think too stiff would be hard on the knees too – with no give at all. So something mid flexing – something that has a bit of give but also a bit of rigidity to it might be your best bet. 2017 Missions should be fine for that. They are a similar flex level to the Cartels for the 2017 model. It’s only 2018s that got a little stiffer.

          Reply
  21. Freddy says

    December 18, 2017 at 7:51 pm

    Hi. I just bought the Rossignol 159 Templar Wide–my first board since an Option Signature in 2001! I need bindings, and wondering if the Customs would be better than the Missions, if only because I like the better quality of the material. However, I’m worried about the stiffer flex because I’m almost a senior with bad knees and want something cushy and forgiving to save them while cruising groomers. However, I am not a beginner. Also looked at K2 Formula and Ride KX, but like the quality of the ratchets on Burton. Cheers.

    Reply
  22. Nikola says

    October 9, 2017 at 2:34 am

    Hi Nate,

    Hope to find you well 🙂

    I have some questions and I’d like someone who has knowledge and expirience to help me (like you) 🙂

    I started with snowboarding like 3-4 years ago and I was spending every season around 10 days on a mountain. Usually that was on rent boards and bindings.
    Now, I decided to get Ride Agenda 2017 from your list as my first begginer snowboard.
    In some store they recommend me Salomon Rhythm Bindings as a great match of price and quality for Ride Agenda.
    What is your personal and professional opinion about this?

    I’m looking forward to hear your opinion and advice.
    Thank you in advance for your help and time 🙂

    Nikola

    Reply
    • Nate says

      October 9, 2017 at 9:57 am

      Hi Nikola

      Thanks for your message.

      The Salomon Rhythm bindings are definitely suitable beginner bindings and would match with the Ride Agenda, in terms of flex, so that would definitely be an option for that board and for you. However, if you’ve spent 10 days a year over the past 3-4 years, then you can probably ride something a little better too if you wanted. The Rhythm will work for you, but if you wanted to go a little bit higher in quality, you could certainly look at some other options. They are well priced – so if price is a concern for you, then that’s a plus for them.

      In a similar price range you’d find the Union Flite Pro, Flux PR and Burton Freestyle. And if you were able to/willing to spend a bit more, you could look at the likes of the Union Contact Pros, the K2 Lien FS, Burton Custom, Ride Rodeo – they’d all be a suitable match with the Ride Agenda. But yeah, if you’re looking for something in that lower price range, then the Rhythms, Flite Pro, PR, Freestyle or K2 Sonics are a good choice.

      Hope this helps

      Reply
      • Nikola says

        October 10, 2017 at 6:12 am

        Hi Nate,

        Thanks for your reply and advices.

        I’ve taken in consideration your recommendation about the bindings. I found myself very interesting in Union Contact Pros Bindings, but they might be expencive for my current budget.
        I found the Rhythm 2017 for a very cheap prize, on some discount, that’s the thing.
        But, comparing the Rhythm and the Flite Pro, what do you think which one is better? Cause I’m wiling to spend more money if you think that would be like a long and smart investment 🙂

        And regarding the snowboard, do you think Ride Agenda 2017 is a good choice?

        Thank you very much in advance for your help and time Nate!

        Nikola

        Reply
        • Nate says

          October 10, 2017 at 10:16 am

          Hi Nikola

          You’re very welcome.

          I prefer the Flite Pros but both would be fine. If you can get the Rhythm considerably cheaper, then that’s probably a best bet. If you can get them for a similar price, then the Flite Pros would be my choice.

          The Agenda is board that’s very easy to learn on, so it’s a good choice for a beginner. It’s freestyle oriented but that doesn’t matter too much in the beginning. If you’re starting to get more speed and doing deeper carves and the likes, then there are better options of course – but if you start out on something freestyle like that, then you can always upgrade later and keep that as your freestyle board, if you get into freestyle type riding.

          Reply
          • Nikola says

            October 10, 2017 at 4:55 pm

            Thank you Nate, I really appreciate your help. Cheers man! 🙂

            Nikola

  23. Chris says

    October 8, 2017 at 2:10 pm

    Hi Nate,

    I’m new to snowboarding and have bought a Rome Mechanic board and a pair of ThirtyTwo lashed boots. Very happy with both (after basing my research from your reviews) but am tossing up between Burton Customs and Missions for bindings? Am wondering about the trade-off between soft vs. medium flex for beginners and whether for the sake of say $30, it would be better in the long-run to get the Missions to avoid having to upgrade the customs in a season or so?

    Thanks and any advice greatly appreciated!

    Reply
    • Chris says

      October 8, 2017 at 9:37 pm

      Sorry Nate, forgot to add I’m 6’2” and over 95kg. Does being a bigger guy sort of moderate stiffer bindings like the Missions for a beginner?

      Reply
      • Nate says

        October 9, 2017 at 9:44 am

        Hi Chris

        Thanks for the extra info – I didn’t read this until after my initial reply.

        Yeah – some extra weight putting pressure on the bindings will definitely affect the feel – so yeah, they will feel a bit softer to you as you’ll be able to apply more pressure against them. Which does make them more suitable for you than they would otherwise be. You could still go Customs and be fine, but in your case you could also go with the Missions, if you wanted something that was going to last you longer.

        Reply
    • Nate says

      October 9, 2017 at 9:30 am

      Hi Chris

      Thanks for your message.

      The 2018 Mission Bindings are a little stiffer than previously, so if you’re going for that model, I’d say they’re a bit too stiff for a beginner and for that setup. The 2017 and previous were a little softer – but even so, I’d say they’re stiffer than ideal for a beginner. But not undoable. The Customs would be a better match to the rest of your setup and would be easier to progress on – but the Missions (2017 and prior) wouldn’t be completely off as to ruin the setup.

      I would still recommend Customs at this stage but if you really want something that lasts a bit longer, the Missions wouldn’t be the worst choice – but certainly wouldn’t call them beginner bindings.

      Hope this helps

      Reply
  24. Nick says

    September 14, 2017 at 9:46 pm

    Hey Nate,

    I’m looking at upgrading this year. I have been boarding for 15 years in total. Anyhow, 38 years old and consider myself at least intermediate to advanced. No problems craving and love the pow and trees. Don’t really ride switch. I typically stick to one direction and don’t do parks but jumps coming out of the trees lol. Been riding a Salomon Pulse 2012 now for 5 years with 2016 Salomon Triggers. Anyhow, I do like the Salomon line and was looking at the Salomon Super 8 with the 2018 Salomon Alibis. What do you think of the set up and do you have other suggestions that may be better but not spending a ton of money. Go boarding at least 10 times a season. Thanks for reading and liking forward to hearing back from you.

    Reply
    • Nate says

      September 15, 2017 at 11:38 am

      Hi Nick

      I think that the Super8 sounds like a really good choice for you. It fits for the style of riding you like to do and is definitely one of the most reasonably priced boards in that kind of category (Freeride boards (which I would class the Super 9 as) tend to be more expensive). And since you are happy with the brand, no harm in sticking with it. It’s also got more of a medium flex – maybe bordering on medium-stiff – but still a little bit softer flexing than most freeride boards. Not by a huge amount but by a little bit – which might be a nicer transition from the soft flexing pulse. You’ll definitely get a lot stiffer flex than the Pulse (which is a good thing for your style of riding) but without going super stiff – which might be a more difficult transition.

      I can say the exact same thing for the Alibis. When I first looked at your post I read Salomon Districts for some reason and I was about to say – go Alibis instead of Districts because Districts would be too soft. But then I re-read that you put Alibis! They would be a great match for that board and would also suit your style of riding.

      So yeah – long story short, I think you’ve made a couple of good choices there. If you’d like any input on sizing I can make a recommendation – but if you know what size you want, go for it.

      Reply
      • Nick says

        September 19, 2017 at 12:21 pm

        Thanks Nate!!

        Reply
  25. Federico says

    September 4, 2017 at 8:53 am

    Hi Nate,

    Awesome writing. I’m a beginner rider with just around 24 hours on the snowboard and i’m linking turns correctly. I’m 173 cm tall and I was wondering which size and bindigns you would recommend.

    I’m considering Arbor Formula 158cm and Burton Custom bindings.
    What do you think?

    Thanks!
    Federico

    Reply
    • Nate says

      September 4, 2017 at 9:54 pm

      Hi Federico

      If you could let me know your weight and your boot size that would really help to give you a recommendation for board length, board width and for binding size. In terms of the Customs, they are a great choice for beginners. But let me know the extra info and I can give you more info in terms of sizing.

      Reply
      • Federico says

        September 5, 2017 at 1:02 pm

        Hey there, thanks for replying so quickly! I’m about 72kg and 9 boot size.

        Reply
        • Nate says

          September 5, 2017 at 3:06 pm

          Hi Federico.

          Thanks for the extra info.

          In terms of the bindings – if you get the Customs go for the medium size (assuming US size 9 – but even with a UK size 9, the Mediums are best).

          I don’t test Arbor boards – so I don’t have experience on the Formula – but based on the specs it looks like it would make a good beginner board. In terms of size, I think the best size for you would be the 155cm would be the best choice for you.

          Reply
          • Federico says

            September 6, 2017 at 8:03 am

            Thanks again. One last final question. I have been offered that board only on 158 since it’s on sale and they don’t have it on 155. What’s the difference between 158 and 155 besides the obvious 3cm ? Thanks!!

          • Nate says

            September 6, 2017 at 12:13 pm

            Hi Federico

            The 158cm is just going to be a bit more difficult to maneuver. A bit harder to initiate turns on. It will make the learning curve more difficult.

            If you were a more advanced rider you could ride a 158 and there are advantages to longer boards – better in powder being one big one. But as a beginner with your specs, I would try and find something that’s 153 to 155. Do you have other options? Also you want a board that will be beginner suitable in other ways (like flex, camber profile etc) but size is also important.

            If you have other options, around that 155 mark and aren’t sure if they’re ok for beginners, feel free to let me know what they are and I can advise you. If you haven’t already you can check the following link out for options too.

            >>My Top 15 Men’s Snowboards for Beginners

            Hope this helps

  26. Johnny says

    January 28, 2017 at 1:44 pm

    Hi Nate,

    For a beginner rider, would you recommend the Union flite pro, Burton mission, or Burton cartel?

    I found a great deal for all three around the same price as each other and not sure which to go for.

    Reply
    • Nate says

      January 28, 2017 at 2:39 pm

      Hi Johnny

      I would go Flite Pro or Mission but probably not Cartel. They certainly wouldn’t be the worst for a beginner but are probably a little bit too stiff for a beginner. The Missions are slightly softer – though not by a huge amount. The Flite Pros will be the easiest for learning on but the Missions and Cartels would be better bindings for when you’re an intermediate and above rider.

      But to be honest I’d go with the Flite Pros and then upgrade once you’ve progressed. I think that would be the fastest way to progress. But that said, if you went Mission or even Cartel, they’re not going to be like riding a stiff freeride binding or anything – they’re just going to be a little more challenging to learn on than the Flite Pros.

      Hope this helps with your decision

      Reply
      • Johnny says

        February 9, 2017 at 5:37 pm

        Hi Nate,

        Really appreciate your quick reply. I have stumbled upon another great option and now have another question.

        What do you think about the Burton Malavita vs Burton Mission for beginners?
        Also Union flite pro is still also in the mix but, I have found the Burton mission and malavita for alot cheaper than the flite pro.

        Your opionion is greatly appreciated and I thank you in advance.

        Johnny

        Reply
        • Nate says

          February 10, 2017 at 3:53 pm

          Hi Johnny

          I think the Malavitas will be similar to Missions for a beginner. Probably not as easy to learn on as the Flite Pros in the beginning – but they will be a more quality binding in the long run. If you’ve found the Malavita for cheaper than the Flite Pro, then that’s an awesome deal! One that would be hard to turn down.

          I still think that the Flite Pro would be easier to learn on – but the Malavitas are a higher end binding and if you can get them that cheap, then it’s a great buy. Ideally, you would get both and ride the Flite Pros for a while and then get on the Malavitas once you are a little bit more advanced. But if you can’t afford both, then it’s up to you. Again, the Malavitas sound like they’re a great price and would be a great investment but the Flite Pros will still be easier to learn on.

          Reply
  27. razvan says

    January 23, 2017 at 12:12 pm

    Hi Nate,can you tell us about mounting the bindings on the board,the right way for a beginner as long as there is a lot of settings that u can do.

    Reply
    • Nate says

      January 24, 2017 at 2:43 pm

      Hi Razvan

      Check out the links below (and any relevant links within that post) to learn more about setting up your bindings.

      ~ How to Put Bindings on a Snowboard

      Hope this helps

      Reply
  28. Victor says

    January 19, 2017 at 8:56 am

    Hi Nate, thanks again for another great article. I have the Yes Basic coming and now considering bindings since there will be sales and I want to keep my eye out. Burton Customs never seem to be on sale, but I am seeing some 2016 K2 Lien AT on a pretty good sale, and a Rome 390. The AT is rated at a 6, and the Rome 390 is at a 5. Will those be okay? Or would you recommend holding out for a K2 Lien FS / Burton Custom?

    Thanks,
    Victor

    Reply
    • Nate says

      January 19, 2017 at 2:34 pm

      Hi Victor

      If I remember correctly, you are a beginner?

      If that is the case, then I would more likely recommend something around a 3/10 or 4/10 flex-wise. That’s not to say that a 5 or 6 will be un-ride-able for a beginner – just that a 3 or 4 will be easier to ride.

      If you can hold out for a while I would suggest it – but I know that it’s hard to wait sometimes!

      Reply
      • Victor says

        January 19, 2017 at 3:41 pm

        Thanks again for your reply! I am a beginner, and went out 3 times this season on my friend’s Jones Mountain Twin and able to carve some Blues now.

        Thanks for the feedback, I’ll keep an eye out for less stiff items. I’m sure something will go on sale, and worst case the Customs are only $180 anyway.

        Thanks!

        Reply
      • Victor says

        January 20, 2017 at 9:15 am

        Another quick question, have you had any experience with the Union ST bindings? Are they a slightly better FLite Pro? I know they’re a teensy bit stiffer from looking at the reviews and maybe a slightly more padded bedding and some added durability. I’ve seen some on sale for the same price as the FLite so I was thinking maybe it was worth it.

        Thanks,
        Victor

        Reply
        • Nate says

          January 20, 2017 at 4:47 pm

          Hi Victor

          I demoed the Union ST bindings last spring. I wouldn’t say they’re a slightly better flite pro – but maybe a slightly stiffer Flite Pro – o.k. maybe slightly better too. And not much stiffer to be honest – they’re still in that medium-soft range from what I felt with them.

          I think the STs would make good beginner bindings though so if you can find a good deal on them, go for it.

          Reply
  29. Evan says

    January 9, 2017 at 10:53 pm

    Hi Nate,

    Thanks for the advice ! really helpful.
    I’m a beginner rider – I can link the turns but I’m trying to narrow them down and get faster on these turns while building confidence. Reading your articles, I’ve set my eyes on the YES basic boards. I’m 5’8-5’9 and 168lb. What board size and binding would you recommend? Thanks!
    Evan

    Reply
    • Nate says

      January 10, 2017 at 3:38 pm

      Hi Evan

      I think the 155cm is probably the best size for you for the Basic. You could even go for the 152cm if you wanted. The 152 would be easier to initiate turns on and maybe if you weren’t already linking turns I’d say it was the better size. But I think the 155cm will last you longer. If you went 152 you might want to up-size relatively soon – unless you were to end up riding more freestyle, then you could stick with the 152cm size.

      In terms of bindings, anything on this list would be suitable. But if you want more options check out the link below.

      ~ Beginner Bindings Ratings Catalog

      In terms of size for bindings, I’d need to know your boot size to recommend the right size.

      Hope this helps.

      Reply
      • Evan says

        January 12, 2017 at 9:23 pm

        Hi Nate, thanks for the suggestion! I think I will go with 152 just to build a bit more confidence.

        Evan

        Reply
  30. mike says

    January 2, 2017 at 7:30 pm

    hey nate what snowboard and binding would your recomend for a beginer.

    Reply
    • Nate says

      January 3, 2017 at 2:21 am

      Hi Mike

      Anything in this list are good options for beginners in terms of bindings. For boards, check out the link below.

      ~ My Top 5 Men’s Beginner Snowboards

      If you’d like recommendations in terms of the best size of snowboard and bindings, let me know your height, weight and boot size and I can recommend the best size for you.

      Hope this helps.

      Reply
  31. Dan Peter says

    December 22, 2016 at 11:44 pm

    Hi Nate. I have 2 brand new bindings and not sure which ones to keep. Both 2016 customs and cartels. I’m an intermediate rider. I easy cruise down the groomers. No fancy stuff. No parks. I’m afraid the cartels might be a little too stiff although I can definately tell they are better quality. I’m also wondering if the customs will be too soft. I have not used any of the bindings yet and I am curious since you have experience with both. What’s your opinion? Thanks

    Reply
    • Nate says

      December 23, 2016 at 8:48 am

      Hi Dan

      I would say keep the Cartels. They are listed as a 7/10 flex but I would say they are more of a 6/10. The Burton Customs are rated 3/10 and I’d say that’s about right.

      I think if you were a beginner rider or you liked to do flat land tricks and small to medium jumps and jibs, then I’d say the Customs. But I think they might be a bit soft for what you want to do. If you are a super casual rider on the groomers, then they’d probably be ok, but if you want a bit more response and performance, then the cartels are the best way to go.

      I think the Cartels are better for an intermediate rider overall.

      Hope this helps with your decision.

      Reply
      • Dan Peter says

        December 23, 2016 at 11:07 am

        Thanks Nate. Ok that’s what I figured. I got a super deal on both bindings that’s why I couldn’t decide. Picked up the customs for $130 tax included and the cartels for $230 tax included. I’ve just heard people say that the cartels are too stiff so I wasn’t sure. I appreciate the response tho. Thanks and Merry Christmas.

        Reply
        • Nate says

          December 24, 2016 at 1:50 pm

          You’re welcome Dan

          Merry Christmas to you too!

          Reply
  32. Sydney says

    November 25, 2016 at 11:28 am

    Hi Nate, great list. But I can’t seem to find the top 5 women’s binding for beginners? Thank you!

    Reply
    • Sydney says

      November 25, 2016 at 11:30 am

      Sorry, found it! Thanks again

      Reply
      • Nate says

        November 25, 2016 at 1:25 pm

        Hi Sydney

        Glad you found it!

        Reply
  33. dave says

    November 4, 2016 at 3:21 am

    Bindings are even more confusing than snowboards. Originally I bought Flow bindings because I hated conventional strap ins. But now I have some Burton Missions which although fairly adjustable (I do like them and they were cheap) I feel arent very user friendly. Example: the high back can be adjusted for forward lean But there is no at a glance indication for where its set. I believe research for a set budget is the way to go for choosing bindings. In the end they hold your feet to the board which is the main factor for how it feels to ride.

    Reply
    • Nate says

      November 4, 2016 at 2:51 pm

      Hi Dave

      Yes you’re right, the main purpose of bindings is to hold your feet to the board! Love it!

      But just going on budget isn’t the smartest way to choose bindings. For example if you are a beginner, then you might end up with very stiff bindings – that will make them very hard to learn on. Typically softer bindings are cheaper and stiffer bindings are more expensive and typically beginners look for cheaper bindings so it often works out ok. But if you’re a beginner and willing to invest more money in your bindings you need to be careful that you get the right bindings that will make learning snowboarding easier.

      Also you want a certain quality or else learning can be frustrating.

      You can learn more about what I think are the important factors for choosing beginner bindings at the link below.

      >>The Key Specs for Beginner Snowboard Bindings

      Reply

Leave a Reply to Krasimir Cancel reply

Your email address will not be published. Required fields are marked *

Follow Snowboarding Profiles

  • Facebook
  • Instagram
  • Pinterest
  • Twitter

Recent Comments

  • Nate on How to Choose the Flex for Snowboard Boots
  • Nate on Top 5 Aggressive All Mountain Freestyle Snowboards
  • Nate on Jones Mountain Twin Review: All Mountain Snowboard Review

Snowboardingprofiles.com participates in affiliate programs and may earn commissions on products linked to on this site.  More Details

Snowboardingprofiles.com is a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for us to earn fees by linking to Amazon.com and affiliated sites.

Copyright © 2014-2021 · SnowboardingProfiles.com ·

  • Home
  • About
  • Privacy Policy
  • Disclaimer
  • Contact